Motion Activated Ligthing
By Christian · 9 October 2026
This article explains how to set up Motion-Activated Lighting, including how to enable it and how to configure it using a schedule.
The Motion-Activated Lighting function is available on devices with a built-in motion sensor. The function can be accessed in the app by:
- Selecting the room where the device is located
- Selecting the device on which the function should be configured
On the Motion-Activated Lighting page, you can choose between Off, On, or Scheduled.
If On is selected, the light will turn on whenever motion is detected, 24 hours a day.
In the "Select Motion Sensors" menu, it is possible to choose one or more additional motion sensors that determine whether the light in the room should be turned on.
Motion-Activated Lighting on a Schedule
To configure Motion-Activated Lighting to run according to a schedule, select "Scheduled" and then press the plus (+) icon next to "Schedule".
Next, select the start and end times for the schedule. For both, you can choose between a specific time, sunrise, or sunset.
It is possible to combine fixed times with sunrise or sunset within the same schedule.
For example, the start time can be set to sunset and the end time to 23:00 o'clock.
At the bottom of the page, select the weekdays on which the schedule should run.
Once the schedule has been configured, select "Save". The schedule will then become active.